Bob,
You are OK.
There is some bleed-through of the IF output during transmit, and I
believe that is what you are seeing.
73.
Don W3FPR
On 12/13/2012 8:16 AM, KD7YZ Bob wrote:
Howdy K3' people:
I was wondering what precautions are taken, or I need to invoke, when I
use any form of transmitting?
At present, the SDR-IQ is connected to the K3's IF BNC. K3's output is
through KAT500 then outside to the antenna some distance away at 80 to
85 feet AGL. Power, while I am testing, is circa 5 to 10 watts.
So I keyed the K3 a few times; called CQ, and so forth. I see my own
trace on the WF of CW-Skimmer, which is set to operate with SDR-IQ as
its "Input" .
Am I golden? Or am I about to overload the K3 and kill it?
thanks
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
