I have installed the 160 option in the K2. I get normal adjustable power out of the low power section on 160 without the KPA 100 online. With the KPA100 online, I cannot get any power out of the K2 at all. I start at minimum power, then start to adjust the power up, I get no power output and when I go above 11 watts, the relays click, the display on the K2 blanks out and it resets, like it is seeing high SWR? Need some help here. The option seems to be working on the base K2, no power out of the KPA 100 on 160. I get very normal function on all of the other bands with the KPA100. Any clues? Also, with the receive antenna set to on, when I punch the ant 1/2 button on the front panel, I get the not installed message. When I switch the antenna on and off in the menu, it is switching from the main to the receive antenna, as witnessed by the change in the receive signals.
Jess AE0CW _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
