It also states in the KAT500 manual that the tuner can be placed on top or under the KPA500 and also several times here on the reflector.
Fred/N0AZZ -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Gary W. Hvizdak Sent: Saturday, December 15, 2012 12:40 AM To: [email protected] Subject: Re: [Elecraft] K3 KPA500 clearance under shelf On Fri Dec 14 2012 at 2339 EST, Ron (W3ZV) wrote ... I am reconfiguring my operating position in anticipation of the arrival of a KPA500 ... How much clearance would be needed to provide adequate ventilation? -- Ron, Per page 15 of the KPA500 Owner's manual ... Specifications : : Size Enclosure only, 4.0 x 10.8 x 10.0 in., HWD (10.2 x 27.4 x 25.4 cm). With projections, 4.4 x 10.8 x 11.8 in. (11.2 x 28.4 x 30.0 cm). The projections are the bottom feet and the fan and cable connectors on the rear. When installing, allow an additional 2" (5.1 cm) behind the fan and above the top cover for unrestricted air flow. Reference http://www.elecraft.com/manual/E740150%20KPA500%20Owner%27s%20man%20%20Rev%2 0C3.pdf 73, Gary KI4GGX K3/100 #2724 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
