Dick,
I assume you are using a K3 and it is locked in MCU Load state. A hard
reset in not normally required in that instance. Look in the K3 manual
(or the K3 Utility Help file) for the instructions on how to force a
firmware load. Follow those instructions 'to the letter', and your K3
should recover.
The "hard reset" is EEINIT - check the manual for the procedure - you
will have to restore from a saved configuration or set up all the menu
parameters manually 'from scratch'.
73,
Don W3FPR
On 12/15/2012 11:14 AM, KC9GSM wrote:
Anyone know how to do a hard reset. I tried the holding SHIFT and
turning on power but it still is locked and display shows MCU. Power
button don't work. Can only shut off K3 by removing power. I do have a
copy of current config saved but can't get K3 to reload. Anyone have a
suggestion??
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
