Hi Dan, When you upgraded the P3 firmware to 1.20, did you also upgrade the SVGA firmware as well? To ensure this happens, download and install the latest version of the P3 Utility which can found HERE <http://I:\Private\n6hz\source_backup> .
If you ever want to go back to an older release of firmware, chances are it will still be on your computer, but you'll need to delete the most recent version. To do this, start the P3 utility and click on the Firmware tab. Note the path that is displayed under "Local Path For Firmware Files" , navigate to this path using My Computer. Once you are in the directory you will find files that look like "p3m####.hex and p3s####.hex . The #### are the version numbers without the decimal point. You need to delete or move any of the files with a revision that is newer than the version you want to load. For example, if you want to load version 1.09 you'll probably find p3m0120.hex, p3m0111.hex etc. Any file that has a #### greater than 0109 would need to be deleted or moved into a temporary folder. Once this is done, restart the P3 utility. You should now be able to download 1.09. Note that the P3 MCU firmware did not support the SVGA board until version 1.11 . If you would like additional help, please feel free to call me at Elecraft 831-763-4211 or email me at pauls at elecraft..... 73, Paul -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-Span-slow-to-update-tp7537386p7567406.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
