Hi Craig: The Key jack (J13) is 3 conductor but only the Tip and shell is
used - there is no connection to the Ring. (It is shown on page 3 of the
Schematics - do a search for J13.)
73, Doug VE3MV
----- Original Message -----
From: "Craig - AE6RR" <[email protected]>
To: <[email protected]>
Sent: Wednesday, December 26, 2012 1:27 PM
Subject: [Elecraft] K3 Key jack
I am using my K3/100 with the RemoteRig setup. The RemoteRig Radio RRC has
a 1/8" or 3.5mm stereo connector for CW key out (straight key). The cable
set came with a stereo 1/8" to 1/8" cable and a stereo 1/8" to 1/4"
adaptor.
The 1/8" plug is a very loose fit in the adaptor and I am having
intermittent connection problems.
I am going to look for a better adaptor or make a 1/8" to 1/4" cable.
The question is, what kind of connector does the K3 have for key input
(not
paddle)? Is it a 3-conductor connector (stereo) or a 2-conductor (mono)
connector?
Happy New Year & 73,
Craig, AE6RR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
