I suggest you run the TX Gain
Calibration procedure on the K3. That
worked for me.
73, Ken K3IU
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
On 12/27/2012 8:24 PM, Bill Hammond wrote:
Seasons Greetings Ellecrafters,
"KPA500 faults on first dit at times"
It doesn't happen all the time and I can't pin down the sequence of events when
it happens, the last time was after a band QSY after clicking on a spot in my
logging software. I am wondering if others have had issue or have solved the
problem. The fault on the KPA500 is too much drive. I have the drive adjusted
per band and none above 32 watts. It resets quickly and all is well after the
initial fault. It usually happens once or twice a day.
After bringing the amplifier back on line, all is well. It just scares me when
it happens :)
73,
Bill
AK5X
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
