As far as I knew the KX3 supports none of the menu settings that you mention until Wayne writes the software. They only work in a K3.
Dave G4FRE From: Erik Overbye Olsen <[email protected]> To: [email protected] Subject: [Elecraft] KX3 offset with transverter Message-ID: <[email protected]> Content-Type: text/plain; charset=us-ascii Hi list I use the Xv144 transverter together with the KX3 Unfortunately the local oscillator in my XV144 still has an offset on +5KHz still after the L14 modification So i want to set the offset from the XV OFS menu in the KX3 I have tried +5KHz and -5KHz but there is no difference in my readout, it still show 5Khz to much My MCU sw is 1.30 and DSP 1.02 Setup on the KX3 is: XV1 on Yes XV1 RF 144 XV1 IF 28 XV1 PWR 5 XV1 OFS5.0 XV1 ADR TR1 Ant idea what i may have done wrong? 73es de Erik [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
