Dick,
I believe that a commercial band decoder (very likely one of microHAM's units) might do this as well.
Of course it will <G>. Station Master can be used either by programming one of the antenna switch ports to generate BCD or by using the amplifier control port as if one were driving the KPA500/FL-7000/Quadra. 73, ... Joe, W4TV On 12/31/2012 3:41 PM, Dick Dievendorff wrote:
I vaguely recall seeing an e-mail over the last few months describing a small microcontroller project that reads Kenwood RS-232 frequency messages and outputs the four Elecraft / Unified Microsystems / Yaesu TTL level band lines (sometimes described as a "BCD" encoding) described as BAND0 thru BAND3 in the K3 Owner's manual description of the ACC connector. We have a query from a Kenwood transceiver owner that would like to supply band information to his KAT500 from his Kenwood radio so that the ATU tracks band changes without requiring transmission. I believe that a commercial band decoder (very likely one of microHAM's units) might do this as well. Can someone help me find the URL of that project description? I recall it was a UK ham, but my memory is a bit fuzzy. 73 de Dick, K6KR ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
