Coy,
That sounds like something is pulling the ACC connector pin 8 to ground
(see Remote Power On in the manual).
I would remove everything from the ACC connector as a quick test. If
that does not stop it you will have to contact Elecraft support, but if
it powers on normally with nothing plugged into the ACC connector, you
will have to check your cables and other equipment carefully.
73,
Don W3FPR
On 1/5/2013 9:58 AM, [email protected] wrote:
Please help. Last night my K3 worked perfectly. Power supply voltage 14volts and
always shut off after rig. This morning, turned on power supply, k3 turns on
by itself.
Pushing the power button only blanks the screen, display backlighting stays on.
What can
cause this, tried unplugging everything then repeating, same result. Please
help, love
the rig. Serial 4548. Looking forward to your reply, Coy K3FO
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
