Steve,
Sorry to say, the K2 has no internal capability that would do that, but
there is always the possibility of an external device.
I recall one in QST a year or so back, and then there is the possibility
of using your computer with its soundcard to feed recording to the
microphone - that does mean you would use the computer mic for your
voice audio input. Several loggers provide that capability.
73,
Don W3FPR
On 1/6/2013 4:25 PM, Steve wrote:
Does anyone know if Elecraft has in its bag of accessories for the K2/100
something like “Voice Record-Transmit” capability which could be used to record
and transmit short verbal messages, such as name, QTH, rigs, antennas, etc?
I have in mind something like the PF1 or PF2 capability but which could be used
to record and store voice messages for use on SSB QSOs I’ve made numerous CW
recordings using PF1 and PF2, but I’ve recently begun to wonder if that
capability exists elsewhere in the K2 for SSB QSOs. If that’s not possible in
the existing K2, does anyone know of an external device - - perhaps made by
some other manufacturer - - which could be attached to the K2 Mic connector
and be used that way along with the mic?
My K2/100 runs very well and has done so all its life on CW and SSB, but some
SSB contacts would be fun to try out using such an auxiliary device.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
