I usually run the line out level around 20. If you need it to be less
than 1, you must be feeding a mic level input. Sounds like you need to
add an attenuator, if you can't use a line-level input.
73,
~iain / N6ML
On Tue, Jan 8, 2013 at 10:50 AM, Jim Sheldon <[email protected]> wrote:
> Is there any chance of getting the K3's line out level lowered? Even when
> set to it's lowest level of 1, it puts out a bit too much audio for my TASCAM
> US-100 external sound card. The TASCAM has an external input level control
> and even with it all the way down, the K3 puts out too much audio for all the
> sound card apps I use (Digipan, MMTTY, FLDIGI, etc).
>
> If set to zero, then there's no output at all. The output level for #1 in
> the menu should be about half or maybe even a quarter of what it is now. That
> would also allow the various Windows mixers a lot better control over the
> soundcard input level too.
>
> Jim - W0EB
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
