Running 4.58 and mine does the same. I set the service monitor down to
S-9, and then set the P3 to -73 dBm, but finally decided I didn't like
peak-hold, and put it back.
73,
Fred K6DGW
- Northern California Contest Club
- CU in the 2013 Cal QSO Party 5-6 Oct 2013
- www.cqp.org
On 1/15/2013 12:45 PM, Pierfrancesco Caci wrote:
"DL5OCD" == DL5OCD <metamo...@t-online.de> writes:
DL5OCD> Hello together,
DL5OCD> i observed when i activate the peak-hold function of the
DL5OCD> S-Meter that one
DL5OCD> "bar" is added to the signal (the hold dot). So the meter
DL5OCD> shows abt 5db too
DL5OCD> much...anyone observed this issue ?
DL5OCD> I use 4.60 FW, SMTR MD set to abs.
Yes, noticed the same a couple days ago when running the s-meter
calibration in absolute mode. Using 4.61 here.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
