It's always a good idea to double check with a meter. It's not
inconceivable that the power cord might later on get mixed up with
similar type cords... which might use a different color coding
system. If in doubt...... measure.
73 de Ray
K2ULR
KX3 #211
On Jan 16, 2013, at 8:31 AM, Bruce Beford wrote:
Fred, It -is- in the manual, on page 4, under POWER SUPPLY:
"A power cable with a 2.1-mm plug is supplied. The
wire with the white stripe is positive. Trim the cable
to the desired length. Plug the cable into the 9-15
VDC jack, shown at left in the illustration below."
But, as Don says, when in doubt, your ohmmeter will reveal reality.
73,
Bruce, N1RX
Which wire is the positive on the cable the one with the long striped
lines? or the other which I think is the negitive. Looked on line and
in the book.. can't find.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
