Hi John,
I think you meant to say that you want to turn on your remote K3 using a
K3/0?
If you bought the cable set, then there is a cable included that plugs
in between the K3's ACC jack and the RRC's I/O jack. Then all you do is
press the power button on your K3/0 at the remote locations and the K3
turns on automatically. It is obvious that the RRC's must be programmed
per the manual.
73,
Mitch DJ0QN
On 17.01.2013 22:44, k7co wrote:
I am wanting to remotely turn on my k3/0. I have a remoterig attached to the
PC via USB and a serial cable from the remoterig to the k3/0. Is there a way
for me to remotely turn on and off the k3/0?
Thank you
Jon
k7co
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Remote-power-on-for-k3-0-via-remote-rig-or-other-tp7568839.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
--
Mitch Wolfson
DJØQN / K7DX
Neubiberger Str. 21, 85640 Putzbrunn
Skype: mitchwo - Home:+49 89 32152700 - Mobile:+49 172 8374436
Echolink: 3001 - IRLP: 5378
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
