Mine works fine, no PTT issues VOX works fine. http://www.flickr.com/photos/ak5x/8396521562/in/photostream
On Jan 19, 2013, at 1:50 PM, Don Wilhelm wrote: > Dick, > > The headphone part will work just fine. For the mic part, I believe the plug > on the mic is a mono plug which will activate PTT as soon as it is plugged > in, so you will have to make up an adpater that wires jack tip to plug tip > and jack shell to plug shell (no connection to the ring at the plug end). > If you want to add another 'tail' to attach a PTT switch, then it connects > between the plug ring and the sleeve. > > The elements are compatible and need to have bias turned on. > > Note that a mono to stereo adapter that you can purchase in a store will > probably not work because most of them wire both the tip and ring of the > stereo end to the tip of the mono end. > > 73, > Don W3FPR > > On 1/19/2013 1:24 PM, Richard Pongratz wrote: >> Will the Heil Proset-IC PS-IC that I am using for my Icom 7000, work with >> the KX3. Are the microphone elements compatible, or am I going to screw up >> either the KX3 or the mic? >> > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html Bill Hammond [email protected] Bill Hammond-AK5X [email protected] [email protected] K3 #69 P3 #817 KPA500 # 149 K2/100 #4637 K1 #2033 KX1 #1023 KX3 #583 W2 T1 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
