Don, that will not work. EXTFSK does not send ASCII over the radio
control port. What it does is use bit-banging techniques to twiddle the
TxD line on a serial port whose UART will not go slow enough to key 45
baud RTTY (that includes most USB-to-serial adapters). The port EXTFSK
uses cannot be shared using LP-Bridge, and MMTTY cannot use the radio
control port to key FSK RTTY, with or without help from EXTFSK.
73,
Rich VE3KI
W3FPR wrote:
Those applications must send ASCII over the same port that is connected to the
K3. Do you have other applications running? Only one application at a time can
open a COM port. If two or more applications attempt to share the same COM
port, the second one will fail to connect. If you do need to share one com port
with 2 or more applications, you can use LP-Bridge (google) to create virtual
ports - the application connects to a virtual LP-Bridge port and LP-Bridge
connects to the K3.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
