The recommended 13.8V minimum is for the external supply, and does take
into account the diode drop.
73,
Rich AC7MA
On 01/27/2013 03:42 PM, Ron D'Eau Claire wrote:
Mine charges just fine from a 13.8 VDC supply.
73 Ron AC7AC
-----Original Message-----
Hi,
I believe your PS reading is too low. The PS reading on the KX3 should be at
least 13.8 volts. There is a polarity diode so your ext power supply should
be 14+ volts.
At least this what my KX3 needs to charge.
73
Jim H K7SSS
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
