Ron,
You can connect the K3 and the K3/0 or another K3 using a null modem cable.
The downside is that you do not have audio or keying capability on the
local K3. If you can live with that, just connect with the null modem
serial cable - no network involved.
Hold CONFIG down for 3 seconds to put the K3 (or K3/0) into terminal mode.
At least that is how it worked when Wayne first developed the code -
some things may have changed since then.
73,
Don W3FPR
On 1/28/2013 12:16 PM, Ron Midwin wrote:
Thanks Chad,
I assume that what you're doing requires purchasing 2 of the Remote Rigs.
I am looking for a less expensive method since I have not need to run the
K3 from another location using the internet. I'd just like to know if
there is a way to use what I have, interconnecting the K3 and K3/0 with my
current network?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
