Kevin...
Don's advice is excellent and reflects his many-faceted expertise with
the K2. He repaired mine a while ago after I had reached the end of my
line with the unit, and his advice here is always spot on.
I would offer a comment on Don's very last bit that less than 200 Hz is
seldom necessary. Generally true. I have found that, when the QRN is
high, either natural or human generated, bandwidths down to the K3's 50
Hz DSP limit can sometimes be useful, even allowing for lost gain and
the ringing and signal artifacts. Just a thought.
...robert
> On 1/31/2013 01:57, Don Wilhelm wrote:
It is rare that you will need less than 200 Hz of
filter width, but YMMV.
73,
Don W3FPR
On 1/30/2013 1:57 PM, Kevin Crossett wrote:
Is 50 hz too narrow. Are there better settings to
help dig out signals from a crowded band?
--
Robert G Strickland, PhD ABPH - KE2WY
verizon.net.usa
Syracuse, New York, USA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
