Hi Jim,
do you by chance also have the K144RFLK board installed? Then no offset is
needed as the reference lock takes care of (no) frequency offsets.
73, Olli - DH8BQA
----- Original Message -----
From: "Jim Spears" <[email protected]>
To: <[email protected]>
Sent: Thursday, January 31, 2013 1:23 PM
Subject: [Elecraft] [K3 - K144XV] frequency offset???
I just installed a K144XV in K3/100 s/n 2295, I entered the frequency
offsets for the two segments as printed on the module. The first time I
tried to listen to a 2m repeater in either segment, I found the frequency
to
be off. working with Ken, K3IU, we decided to zero out the offsets and
the
repeater frequency displayed on the rig allowed the repeater output to be
sharp and clear. Is this normal? Has anyone else encountered this
phenomenon?
Jim/N1NK
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
-----
E-Mail ist virenfrei.
Von AVG uberpruft - www.avg.de
Version: 2013.0.2890 / Virendatenbank: 2639/6066 - Ausgabedatum:
29.01.2013
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
