Denny,
But I was thinking that you would not want to physically remove the
tuner - putting it into CAL will effectively remove it.
73,
Don W3FPR
On 2/4/2013 7:01 PM, Dennis Rayfield wrote:
Thanks Don. My thought was that when I have it going into the amp, the KAT1
does not do me much good anyway, the tuner I have on the outboard side of the
amp will be doing the work.
Denny - KI3F
On Feb 4, 2013, at 6:57 PM, Don Wilhelm <[email protected]> wrote:
Denny,
Yes, it is really that simple. I am not sure about your "plug it in"
statement, if you use a connector at J1 on the filter board, you will not be able to plug
in the KAT1 - so you may want to look for another place to pick up the 6R signal and 6
volts.
73,
Don W3FPR
On 2/4/2013 6:41 PM, Dennis Rayfield wrote:
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
