Why not just emulate a K2? All you need to do is to issue IF response to the KRC2 and it will respond the the band/frequency and make alternate selections. The PC does not need to listed to anything from the KRC2 unless you really want it to.
Jack B, W6FB On Feb 6, 2013, at 9:08 AM, Craig - AE6RR <[email protected]> wrote: > I would like to use a KRC2 at my remote station to control various relays. > > This would require either new or modified firmware as the standard firmware > listens to a radio's CAT port and decode band information. > > I would like communicate with the KRC2 via a terminal program such as > HyperTerminal and manually enter commands to actuate the relays. > > I have been thinking about writing my own program for the PIC16 but if > someone has already done this, I would like to talk to them. > > > > 73, > > - Craig, AE6RR > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
