Andy,
You did not say which Heil ProSet you have (there are several, all
different). If it is the ProSet-K2 or a ProSet-iC, then it uses an
elecrtret element, and most any electret element microphone will work,
including the inexpensive computer microphones - just wire a Foster 8
pin mic plug to whatever you have on your mic configuration header. The
bias resistor is needed for these Electret element microphones.
If OTOH, you have a ProSet with the HC4 or HC5 element, that is a
dynamic type and you will have no bias resistor installed in the K2.
You will have to shop for a dynamic microphone if you want to use the
two interchangeably. Shop around, some of the old CB microphones sound
good and the mic plug can be re-wired to match your existing microphone
pinout.
73,
Don W3FPR
On 2/6/2013 6:10 PM, Andreas Hofmann wrote:
Hi,
I am very happy with my Heil Pro Set head set but would like to get a station
mike. Can someone suggest one that works well with the K2 + MicroHam and does
not break the bank?
Thanks
Andy, KU7T
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
