Brian,
Depends entirely on the software between the virtual serial port
presented to Utility and the physical port connected to the radio.
For example, I have a MicroHam interface box and it cannot be reliably
used when performing a K3 firmware load because it attempts to interpret
the data stream -- its serial port to the radio does not simply emulate
a wire.
I also have a RigExpert interface box and it works perfectly with
Utility -- it does not attempt to interpret the data stream.
LP Bridge is creating a "virtual K3" and passes data from its "virtual
K3" to other applications to allow sharing of the state of the radio
(frequency, for example) and as a result is interpreting elements of the
data streams. The firmware load data is thus incompatible with the
intent of LP Bridge.
73,
Lyle KK7P
...Maybe this has come up before. It is now obvious that the K3
firmware program will not work on a virtual serial port (LPBRIDGE).
Tried.
For curiosity, why is that?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
