Jim, That solved the problem.
Thanks, Dan W6DAS On 2/9/13 4:43 PM, "Jim Sheldon" <[email protected]> wrote: > Dan, you need to upgrade your K3 Utility program to the latest one - > 1.12.10.10, and the current production release of the software is 4.60. The > FPF you have, 1.15 is still current but both DSP's need to be upgraded to > 2.80. That should fix your problem. Had to do the same thing here to get > mine working again after I accidentally did an EEINIT when troubleshooting a > problem. > > Jim - W0EB > >> > Hello >> > >> > Having received a XG3 for Christmas, I decided to calibrate the RF >> > Gain on the K3 which I have had for over a year now. Using the RF >> > gain calibration routine in the K3 utility, I had an issue while >> > going through the gain routine with the subreceiver. >> > >> > First time through, the main receiver went through calibration >> > without problem. When doing the subreceiver the low-level started >> > normally, but halted with the entry in the status window, plus a >> > popup which stated, ³No Response to DSP Subreceiver RF Gain >> > Calibration Table Write². I tried this repeatedly with same >> > result. Furthermore, going back to restore the factory default >> > tables, I got the same error on the main receiver. The rig still >> > hears OK, but found the issue a little disconcerting. I had to >> > cancel the procedure, and furthermore, it appeared the K3 lost its >> > connection to the K3 utility, as it went through its autobaud >> > connection routine after canceling the calibration. >> > >> > I thought I had followed the on-screen instructions very carefully. >> > The versions: >> > >> > K3 s/n 5820 (10/2011) K3 Util s/n 1.12.3.28 >> > MCU 4.51 >> > FPF 1.15 >> > DSP1 2.76 >> > DSP2 2.76 >> > DVR 1.13 >> > >> > Is this a hardware failure, software mismatch, bug, or operator >> > error? >> > >> > 73, >> > >> > Dan >> > W6DAS >> > >> > ______________________________________________________________ >> > Elecraft mailing list Home: >> > http://mailman.qth.net/mailman/listinfo/elecraft Help: >> > http://mailman.qth.net/mmfaq.htm Post: >> > mailto:[email protected] >> > >> > This list hosted by: http://www.qsl.net >> > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
