Hi everyone, Going wireless, adding the transceivers, would increase the cost quite a bit and power has to be figured out. Some day, perhaps.
I have received many suggestions from folks who have seen the video and a lot is going to change. Once the next prototype is built, I'll put up a new video. Thank you to everyone who sent me feedback and I apologize that I wasn't able to reply to all of them. They were all read and you might see your suggestion in the next video. 73, Nick N3WG On Feb 10, 2013 8:26 AM, "Greg" <a...@cablespeed.com> wrote: > Something like this would probably work. > > > http://gridconnect.com/industrial-wireless/bluetooth-serial/bluetooth-to-serial.html > > Greg > On Feb 10, 2013 7:52 AM, "Pete Smith N4ZR" <n...@contesting.com> wrote: > > > Particularly if there could be a wrieless version, maybe using someof > > Roving Networks' bluetooth technology. Or is this in the works? > There's a > > hint of that on Pignology's web site. > > > > 73, Pete N4ZR > > Check out the Reverse Beacon Network at > > http://reversebeacon.net, > > blog at reversebeacon.blogspot.com. > > For spots, please go to your favorite > > ARC V6 or VE7CC DX cluster node. > > > > On 2/9/2013 10:10 PM, Gary wrote: > > > >> Well done Nick! I like your remote button & knob kit very much. Please > >> keep > >> us posted on your progress. I'm interested and suspect Elecraft is as > >> well. > >> Gary N6LRV > >> > >> -----Original Message----- > >> From: elecraft-boun...@mailman.qth.**net< > elecraft-boun...@mailman.qth.net> > >> [mailto:elecraft-bounces@**mailman.qth.net< > elecraft-boun...@mailman.qth.net>] > >> On Behalf Of Nick Garner > >> Sent: Friday, February 01, 2013 12:16 PM > >> To: Elecraft Reflector > >> Subject: [Elecraft] [OT] I made a knob, a PigKnob. > >> > >> Hello Everyone, > >> A few weeks ago there was a thread on here about a remote tuning knob. > >> This topic has come up every now and then on the mailing lists out > there > >> and it's something I've wanted to try to make for a while. I got back > the > >> prototype boards yesterday, soldered on the parts, loaded my firmware > into > >> the microcontroller and hacked up the enclosure to make it all fit. > >> > >> I made a demo video of it yesterday. It can be viewed here: > >> http://youtu.be/bqBU2L8rbyw > >> > >> It works great with a K3 as well. I was going to use that in the video > >> but > >> my long serial cable has walked off. > >> > >> I'd be happy to hear any feedback, even if it's just, "I'd be interested > >> in > >> one." I need to gauge demand before pulling the trigger on making it. > >> Please email me directly to avoid filling the reflector with an OT > >> discussion. > >> > >> 73, > >> Nick > >> N3WG > >> > >> ______________________________**______________________________**__ > >> Elecraft mailing list > >> Home: http://mailman.qth.net/**mailman/listinfo/elecraft< > http://mailman.qth.net/mailman/listinfo/elecraft> > >> Help: http://mailman.qth.net/mmfaq.**htm< > http://mailman.qth.net/mmfaq.htm> > >> Post: mailto:elecr...@mailman.qth.**net <Elecraft@mailman.qth.net> > >> > >> This list hosted by: http://www.qsl.net > >> Please help support this email list: http://www.qsl.net/donate.html > >> > >> > > ______________________________**______________________________**__ > > Elecraft mailing list > > Home: http://mailman.qth.net/**mailman/listinfo/elecraft< > http://mailman.qth.net/mailman/listinfo/elecraft> > > Help: http://mailman.qth.net/mmfaq.**htm< > http://mailman.qth.net/mmfaq.htm> > > Post: mailto:elecr...@mailman.qth.**net <Elecraft@mailman.qth.net> > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html