Hi,
I literally worked my first RTTY QSOs ever last weekend in the WPX RTTY contest. Was a lot of fun. A few question come up. I have aligned my filters according to the well written document of Don, W3FPR at http://www.mail-archive.com/[email protected]/msg103915.html. And I seemed to have done it right, because switching through the filters does not move the signal, just tightens the roll off. Question 1: My frequency is 1000Hz off compared to what DX cluster spots show. When I see a spot at 14.077 it, is for at 14.078. This must have to do with the fact that the filters centers at 1000Hz, but is there a way to compensate somewhere for this? Would be nice to be able to use the band map of my contest program to jump to stations I would like to work. Question 2: I noticed that 15m and up, I had to put both MTTY and the K2 in RTTY reverse. Is this correct? I happen to remember that the switch to USB from LSB happens on 20m. Now I am wondering if this is something special for RTTY or not. Thanks Andy, KU7T ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
