Might double check your xvtr settings in the menus and make sure they look right. If you have a recent good config backup of the K3 you can try restoring it.
Other things to try: - Direct setting the frequency via the keypad. - If you have quick memories assigned to M1-4 keys to set 2M favorite frequencies try that. - Check to see if you can hear a known frequency like packet on 144.390MHz or a FM repeater. Perhaps the .XXX portion of the dial is accurate as is the xvrter and the XXX. portion of the display frequency is corrupt. - Spin the dial either side of 146.0 causes the xverter to switch local LOs. Any of these methods might get you back were you belong. - Mike -- View this message in context: http://elecraft.365791.n2.nabble.com/K144XV-Problem-tp7569906p7569935.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
