These items had never come to mind here, but since Paul posted this, I checked mine and echo his comments. While power is being displayed in the VFO B window, the AF/RF gain control is disabled until either the Power switch is tapped OR the AF/RF switch is tapped. Either will exit the power adjust and bring the Keyer/Mic knob back to it's normal function and the AF/RF to whichever of the two had been selected prior to setting power.
Not sure if this was intended, but it can be annoying. Also not being able to exit the "Tune" function with either a paddle tap or a hand key tap hasn't been a problem here, but for some it might definitely be problematical, especially when using an external auto tuner. Jim - W0EB > Hi, > > CW mode: Hold PWR knob, to get power in display. > *** Now AF knob can't change AF gain*** > > CW mode, exit TUNE mode: > if menu CW KEY 1 = dash or dot then TUNE mode can be exit by > touching CW paddle > *** if menu CW KEY 1 = HAnd then TUNE mode can NOT be exit by > touching key*** > > 73, paul > hb9axl* > * > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: > http://mailman.qth.net/mmfaq.htm Post: > mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
