Thanks to Wayne's pointing to the proper Dual Watch Command SB1 for on and SB0 for off, I've got a working set of Macros assigned to PF1 and PF2 to effectively turn split on, set the B VFO up 2 KHz, Turn on Dual Watch so I can hear the pile (must use stereo headphones or plug in a set of stereo speakers) and make sure RIT and XIT are both off.
The VFO B knob will tune the second receive frequency. I set PF1 to turn it on and PF2 to turn it off. The 2 macros tested functional on the TX5K pileup on 20 meters a few minutes ago. Use the LATEST KX3 Utility to send these to the KX3. Jim Sheldon - W0EB A>B;A>B; (Tap A>B twice to make sure A and B are set to the same frequency and mode to start out with) SET TRANSMIT TO VFO B;MOVE VFO B FREQUENCY UP 2 KHZ;TURN DUAL WATCH ON;TURN RIT OFF;TURN XIT OFF; SWT25;SWT25;FT1;UPB5;SB1;RT0;XT0; (Assign this macro to PF1 according to the instructions in the KX3 manual) Restore everything to what it was before, turning Dual Watch off, setting TX back to the A VFO and again make sure RIT and XIT are off. This last may not be necessary but better safe than sorry. SWT25;SWT25;FT0;SB0;RT0;XT0; (Assign this one to PF2) Remember the semicolons after each command or it won't work. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
