Don, Ok, that worked, Tried a couple of Q's and all ok but notice that with 5 bars on ALC I get 100 watts out. If I Adjust the TX pot on the Signalink to reduce power, The ALC drops off.
On ICOM gear I'm used to controlling power out with theTX pot on the Signalink. Is it different for K3? 73, Ron, K5HM [email protected] www.qrz.com/db/k5hm -----Original Message----- From: Don Wilhelm [mailto:[email protected]] Sent: Monday, March 04, 2013 4:02 PM To: K5HM Cc: [email protected] Subject: Re: [Elecraft] K3 PSK no output Ron, Try in TX TEST mode - everything goes into transmit except there is no RF output. Adjust the audio level (both SignaLink and the "mic' gain on the K3) to obtain 4 bars solid on the ALC meter with the 5th bar flickering. If you are not able to obtain that level, check the SignaLink documentation to determine how to plug it for Line level audio output - I believe it is a jumper, but the default position is for low level output (mic level). Once you are able to obtain the proper deflection on the ALC meter, get out of TX Test and try it. You should have RF output. 73, Don W3FPR On 3/4/2013 4:42 PM, K5HM wrote: > Using Tigertronics sound card. Followed the set up instructions for PSK in > the Fred Cady, KE7X book. Installed the K3 jumper block from DX Engineering, > and the K3 interface cable. Using Digipan, I try to call CQ. Rig goes into > transmit mode, the macro runs but no power out. Adjusting the TX pot on the > Signalink does not make a difference. I can receive Ok. But either the > soundcard is not outputting anything or I missed a step in the setup. > Config.Lineout is 10 as recommended VOX/No VOX does not seem to matter. Rig > is in Data A mode. I must be missing a step in set up. > > Suggestions welcome. > > 73, > Ron, K5HM > [email protected] > www.qrz.com/db/k5hm > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
