Had to forward this again due to the stupid reply to that assigned on this list. :o(
On Tue, 12 Mar 2013 06:50:54 -0600, Gary McDuffie <[email protected]> wrote: On Tue, 12 Mar 2013 05:12:45 -0700 (PDT), k2np wrote: > I had the exact same issue. It looks like pins in the manual are probably > shorter than they are in the latest kits. I put it on 2/3rds of the way and > it seemed to 'latch' in place. I finished assembling the kit and the fan was > working so I figured that was good enough. Same on my kit I built recently. I corresponded with Elecraft and sent a picture of the length and how far the plug was lacking of being fully inserted and was told to cut off the pins. Just make sure you have a good penetration of the female socket on the wire when you insert it. Cut off excess and be done with it. I have pix if you want to see how long mine was. Look back in the archives and I think you'll find my posting that tells how much too long it was. The pins are very long coming out of the board. Gary -- -- http://ag0n.net 3055: http://ag0n.net/irlp/3055 NodeOp Help Page: http://ag0n.net/irlp ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
