Just finishing up a build for Tony, KE6JZF of a K1/KFL1-4/KAT1/KNB1 (#3195), and have found that the 2.2uF-50V electrolytic cap C67 (where 25V is called out in the Parts List) may be a bit too tall.
It doesn't seem to bother at C31, C54, or C10 on the NB board (all 50V). When it came time to bolt the NB to the RF board, C67 was in the way. After trying to gently re-wet the leads and lean it over U2, I wound up wrapping a little wire around the (too-short) leads and mounting it on its side under the board (which seems to fit OK.) Anybody seen a better fix for this physical interference fit? Final flux wash is the next step, unless I hear better news. -- '---O=o=O---' 73, Phil Barnes-Roberts WA6DZS DM04we | Mailto:pbarnrob at ACM dot org 42 is not an answer, it's an error code. The universe is saying 'Error 42: meaning to universe not found' --DoctorMO, ubuntuforums.org ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
