Enzo,
Yes, there are no direct commands to change the KDSP2. You will have to
do it as you have outlined with the SW commands emulating actual button
taps and holds for the KDSP2 and if you want to see the results, the DS
command is the way to do it.
The KDSP2 was originally designed by a 3rd party (who is now an Elecraft
employee), so the method of accessing the DSP menu was an 'add on' to
the normal K2 menu system.
I do not know of any software application that can directly control the
KDSP2 option.
73,
Don W3FPR
On 4/4/2013 12:46 PM, iw7dmh wrote:
Good evening,
I was wondering if I can change DSP2 filter settings through the KIO2 cat
commands.
Since there are no dedicated commands to control DSP2 filter, I suppose the
only way is to set the emulation mode (SW command) and then use the DS
command to read the filter status on the display.
Can you confirm that this is the correct way or can you suggest me a work
around mode?
Also, are there (possibly free) software that can control K2-DSP2 filters?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
