My rig is a K2 with a KPA/KAT in a separate enclosure. The rig will operate at 10W or less with the power turned down, but I'm taking additional current drain from the presence of the KPA/KAT.
I'd like to simply disconnect the high-current supply from the KPA/KAT to operate a low power and lower current drain without completely disconnecting the KPA/KAT. (The K2 has the low power antenna tuner.) This seems reasonable from the KPA manual and the KAT should become a straight through connection. However, the KPA schematic says that the passive low pass filter will remain in place. No problem with that in principle, however, will the correct band settings occur without the high-current supply in place? There's no straight through connection around the filters that I can see. Chris NQ8Z -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-KPA-KAT-operation-WITHOUT-high-current-power-tp7572518.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
