Hi Jim, Waffle style non-adhesive shelf liner works well for this application. Cut it out over the speaker or just use two narrow strips. One strip for the front feet of the P3 and the other strip for the rear feet. Here's a link with a nice illustration:
http://www.amazon.com/Duck-1100733-Non-Adhesive-12-Inch-20-Square-Feet/dp/B002AS9NB2/ref=pd_sim_hg_2 It is available at Home Depot and Lowes in smaller/cheaper rolls. 73, Mike K2MK Jim Brown-10 wrote > On 4/11/2013 5:03 AM, > pastormg2@ > wrote: >> I am considering a P3 to go along with my K3. I would like to sit the P3 >> on top of my K3 > > I've have P3s sitting on top of both of the K3s in my SO2R setup since > they first became available. No problem with operation. The only glitch > is that because I have both K3s tilted upward with the built-in bail, > the P3s will sometimes slide down when I push a button, so I've learned > to do that carefully. :) > > 73, Jim K9YC -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-Connection-tp7572483p7572524.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
