Ed,
If you are having trouble getting the K2 filters aligned, you might want
to refer to the information in the K2 Dial Calibration article on my
website www.w3fpr.com. Use Spectrogram (or another audio spectrum
analyzer) to be able to see the filter passband.
You can download Spectrogram from the home page on my website.
Leaving the counter probe in the K2 should only be done with an
unamplified K2/10. If you have the KPA100 or use an external amplifier,
remove the probe.
73,
Don W3FPR
On 4/15/2013 11:53 PM, Eddy wrote:
Quick question regarding my 3000+ K2, I'm "struggling" to get the filters just
right so can I leave TP2 connected all the time? So, I haven't noticed any adverse
affects.....
This way I won't have to take the cover to try and new filter setting.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
