Fred,
Change VFO CTS See the statement in the menu chart -
"VFO counts per turn (100,200. or 400). Smaller values result in easier
fine tuning of VFO; larger values result in faster QSY."
You have yours set for the fastest rate - 200 is the default.
Yes, that will also change the 10 Hz tuning rate.
You will likely want to change VFO FST as well to get the fine tuning
you want, and that might also lead you to use the Coarse rate rather
than 10 Hz for faster QSYing.
You should have some drag on the VFO knob. IMHO, you should not be able
to spin it for more than 3/4 turn. With very light drag, it is more
difficult to get it to refrain from drifting a bit when you remove your
hand. Also your fast VFO CTS contributes to this situation as well.
73,
Don W3FPR
On 4/21/2013 3:42 PM, Fred Jensen wrote:
I could use a suggestion or two on setting the VFO tuning rate. I
generally like 1Hz resolution for CW/RTTY and 10Hz for SSB. My
current settings are:
VFO CRS: 1.0
VFO CTS: 400
VFO FST: 50
VFO IND: no
VFO OFS: OFF
10Hz rate is fine. At 1Hz, the VFO knob is too "sensitive" [too many
Hz for very little movement of the knob]. In fact, all I have to do
is touch the knob to move it enough Hz to fall out of the APF
bandwidth on CW and screw up decoding on RTTY [AFSK]. I have the knob
fairly loose so I can spin it quickly. Holding "FINE" gives me 100Hz
resolution which is fine.
I've played around with the various settings, but can't seem to find
what I want, so I thought I'd look for others' ideas and settings.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
