These are intermittent. They appear at power on just before the welcome message. At first I thought it was only ERR BP1 but since I have realized that pressing the disp button also shows the others if I can do it fast enough to read them before they go away and into the welcome message. They are getting more often and mostly do not go away with power down and up again. Guess it is time to break it open.
I have also been have having occasional trouble with no power out. This only happens from power on and not during operation once going. Just wondering which is the real problem. The last thing that was done and this is not "recent" is to remove my KIO3 bd and install the KIO3A board so I can connect my internal 2 meter module (not yet done). I don't think I had this problem before that. Which of the listed errors is likely the "root" cause of all? Thanks, Jim KG0KP ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
