Reading the list with respect to adding an internal mic - there is an easier option.
Take a 90 deg 4 pole mic plug and mount an electret insert inside. Method Open the plug cut the cable strain relief down to about 2.5mm 1/10 inch remaining from the end of the plug Mount the electret insert behind this, inside of the plug. Wire to ground and mic Put a tiny piece of sponge in the end of the strain relief, close the plug. You now have a miniature mic to use with VOX - it works ! You can turn the mic to the direction required and it takes the minimum of space, you can even leave installed ready to use. I have a picture available if needed. Phil G4UDU AG4ML ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
