Jack,
It sounds like the K3 Keyout is not working, It is easy to test that --
Put the K3 into TX TEST
Then tap the XMIT button and check the resistance between the center and
shield of the Keyout connector.
If it does not go to a low resistance, it is time to contact K3support.
73,
Don W3FPR
On 5/23/2013 9:29 AM, Jack Brabham wrote:
I am having a similar problem, the K3 doesn't key up my 76A. Not a
molex problem, since the amp keys if I pull the cable from the K3 "key
out" and short the center pin to the shield. Someone mentioned
"config settings", but I'm not seeing any that seem relevant to "Key
Out". So my question is "What config settings?".
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
