I rechecked the Signalinlk cable and connected the PTT to PTT IN on the K3. Works correctly. It worked before, so I must have been dreaming about where I had it connected.
Probably senior moment. Thanks to all. 73, Ron, K5HM [email protected] www.qrz.com/db/k5hm ________________________________________ From: Gerald Manthey [mailto:[email protected]] Sent: Saturday, May 25, 2013 6:55 PM To: K5HM Cc: [email protected] Subject: Re: [Elecraft] K3 Conflict with amp and Signalink I have all those and can confirm the Signalink does not use key out. Gerald On May 25, 2013 5:28 PM, "K5HM" <[email protected]> wrote: The Signalink USB and the keying line for the linear amp both use the Key Out port on the K3. Is there a solution that would not require unplugging the Signalink sound card? 73, Ron, K5HM [email protected] www.qrz.com/db/k5hm ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
