-----Original Message----- From: [EMAIL PROTECTED] To: [email protected] Sent: Mon, 17 Oct 2005 16:29:24 +0000 Subject: [Elecraft] Operating question - OT
where the station I am working is drifting (obviously he doesn't have Elecraft rig!). If this happens, should I move my vfo frequency to chase him, or should I continue to transmit on the same frequency and use the RIT to hear him? I guess another way to say this is, if his transmitted signal is drifting, is his receive signal also drifting and is so, by the same amount? (Assuming he has a transceiver, of some type and not a separate xmitter and receiver. ____ Best bet is to use RIT to follow him. Here's why: You can't be sure why the other guy's QRG is wandering around. It could be his transmitter, receiver, or both. Or maybe he bumped the tuning knob, or maybe something else. You don't know if his receiver is wandering too, or just the transmitted signal. If you retune with the main tuning knob, you will wander too, and he will readjust to find you, and pretty soon the both of you may wind up kHz from where you started. This sort of thing used to be pretty common back in the early days of transceivers, and it wasn't always due to drift. What would happen is that station A would call CQ and station B would tune in A so that A "sounded right", and would answer - which may or may not have been dead-on-zeroed. Then A would adjust *his* rig so B "sounded right" - which would then not sound right to B, who would retune...etc. 73 de Jim, N2EY _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
