Check this out. I got one and it works great.
http://acmeqrp.com 73 Steve W1SFR On May 27, 2013, at 6:50 PM, Lee Stephens wrote: > > Thanks John, > > That satisfies my need on several levels. > > 1. I can set the output voltage and then lock the set screw so it doesn't > move if bumped. > 2. It weighs 1.6 ounces > 3. I can make up whatever length leads I want with APP connectors > 4. The output voltage isn't going to waver unless the input voltage drops > below the desired output...say clouds roll up and it goes from 16 vdc to 13 > vdc and I have it to ~13 vdc. > 5. They are in Akron, OH and the shipping time to Northern Kentucky wouldn't > be very long and they say they are in stock. > > Again, Thanks John, > > 73, > > Lee Stephens > KK4JSJ > KX3 #3462 > > > > On Monday 05/27/2013 at 6:34 pm, Dr John H Farmer wrote: >> >> >> Hi Lee, >> >> The open circuit voltage on these panels is often higher than is acceptable >> to the radio's input regulator. >> >> I use one of these: >> >> http://www.dimensionengineering.com/products/anyvolt3 >> >> >> They're tiny and weigh nothing. I have leads with APP connections attached >> to it. >> >> >> 73, >> >> >> John >> VK7JB > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
