Curt,
Those are not transformers, but are shielded inductors.
I can't tell from your description, but they are either 4.7 uHy or 1 uHy
inductors. If the tuning slug has a flat adjustment slot all the way
across the top of the slug, it is the 4.7 uHy, but if the slot is small,
it is a 1 uHy.
73,
Don W3FPR
On 5/28/2013 8:27 AM, Curt wrote:
When I built my K2 several years ago, there were several tunable coils left
over (?!). The
coils used for the build had labeling and stripes per the build instructions.
BTW, the K2 works FB.
The leftovers are 10mm on each side, with grey slug, the only label anywhere is
"coils" printed
twice on top. Bottom has three pins on one side, two on the other. There is a number
"46" stamped
into the plastic ibetween the pins.
Would anyone be able to help better identify these coils? I have a homebrew
project in need of
some transformers.
73, Curt KB5JO
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
