You hit the nail on the head.. sorry to bandwidth.. 73
From: Joe Subich, W4TV
Sent: Tuesday, May 28, 2013 8:53 AM
To: Mike Greenway
Cc: [email protected]
Subject: Re: [Elecraft] RX SELECTION
DIGOUT1 is saved by band *and* by antenna if one has the KAT3
installed. Be sure it is set ON for *both* antennas on six.
73,
... Joe, W4TV
On 5/28/2013 8:39 AM, Mike Greenway wrote:
> My K3 has the KAT3 and I am using the external PR6 via the RX ant. On 6 M if
> I have the antenna on Port 2 everything works correctly as the signal goes up
> in strength when I select RX bringing in the PR6. If the antenna is on Port
> 1 I get the opposite effect. The signal goes down at least 4 or 5 S units
> when selecting RX to bring in the PR6. Any suggestions?
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
