This approach is IMHO the best and it works very well in SPE Expert amps in
combination basically with all the makes of transceivers including Elecraft.
I use Expert 1K-FA with K3 and KX3 and tuner of the Expert is always in a
correct position by the time I switch to TX.
It is a pity that Elecraft did not adopt the same approach in case of KAT500
which I also have. Lack of this feature makes it impossible for me to use
KAT500 in combination with HLA300 amp and KX3 as an exciter. I would
definitely implement any hardware mod in KAT500 that would make KAT500
change setting based on the VFO data from the exciter if Elecraft ever will
design such a modification.
73, Igor UA9CDC
Hopefully someday the
K3 frequency could be shared with the KAT prior to transmit so that the
relays can be propositioned.
73, Bob, WB4SON
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
