I have just received a replacement J93 jack for my KRX3. I broke the original jack while trying to plug in the miniature coax.
I have removed the KRX3 from the K3. I have removed the top cover of the enclosure for the KRX3. Now I am stuck. The board does not come out of the bottom cover readily --- I recall it kind of snapped in during the build. I am afraid to force it. I think I need to get to the bottom of the board to do the job. There seems to be a pin still stuck in the through-board hole for one of the pins, and I will have to get it out from the bottom. One other question. This jack has 2 pins on the ground side, and one center pin. Please describe where they should go on the board. Nothing is marked, at least on the side I can see. Also, just for curiosity, what is J93? It is a jack with no center pin, and it seems to connect to nothing in the assembly process. Tnx de Brian W3BW *Brian F. Wruble, C.F.A. *70 is the new 40.* * Mail: 1107 Key Plaza, PMB 447 Key West, FL 33040-4077 Summers: P.O.Box 57, 7400 Augustine Herman Highway, Georgetown, MD 21930 eFax 305.768.0278 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
