Don tapped out: > > If you have opportunity to use a real serial port on the computer, do > so, it will take that uncertainty away.
OK Don, good idea. I pulled the cable from rotor (COM1) and stuck it on the K3 ... thus straight to the RS232 port, DB9 on the back of the PC .. works fine and I'll be able to make the EME sked! Now to try and find out why the K3 would not see, or be seen by, the USB/COM port as it has for 6 months. Was quite a shock. The XV432 transverter works quite famously in JT65 mode for long periods of time on EME skeds when the QSO doesn't go in ten minutes. Have had it up to an hour and the xv432 is still solid. The watt meter tells me what the output it. The LED's, well, still goofy and generally just eye-wash for accuracy measured over time. 73 -- 73 KD7YZ Bob ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
